> For the complete documentation index, see [llms.txt](https://docs-7.phoenixlidar.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs-7.phoenixlidar.com/rover/hardware/camera/a6k-lite-camera/operating-with-spatial-explorer/dual-a6k-lite-setup.md).

# Dual A6K-Lite Setup

To add a second A6K-Lite camera, follow the same steps as mentioned under [Initial Camera Setup](/rover/hardware/camera/a6k-lite-camera/operating-with-spatial-explorer/initial-camera-setup.md). Adding a second camera works the same way as adding a single camera. 

The second cam will be listed as CAM1.   

Under the Acquisition section of the rover settings menu, add the following information for **Event Pin and String Trigger / Maintenance** for **CAM1**:

| Setting                          | Value            |
| -------------------------------- | ---------------- |
| **Event Pin**                    | Set to Primary 3 |
| **String Trigger / Maintenance** | pin2shi50;       |

When using two of the A6K-Lite cameras, the field with **Serial Number** needs to be filled out for both cameras. A document with the serial number for each camera will be shipped with your dual-camera setup.<br>